DPI620G Genii
Advanced modular calibration system
A single handheld for pressure, electrical, temperature and frequency calibration, with HART and Fieldbus communication built in.
Not sure which model you need? Ask our team before you order.
A multifunction calibrator for four signal types, plus pressure.
The DPI620G Genii measures and sources current, voltage, resistance, frequency, RTDs and thermocouples on two channels at once, so it can drive a device and read its response without a second instrument. Error is calculated at each test point and stored against the tag. Pressure is added through interchangeable PM620 modules.
- Electrical
- ±30 V and ±55 mA measure, 0.2 to 24 mA source, 24 or 28 V loop power
- Temperature
- Full RTD and thermocouple libraries, measure or simulate, 0.01° resolution
- Frequency
- 0 to 50 kHz, square, sine and triangular output, plus CPM and CPH counters
- Communication
- HART built in, Foundation Fieldbus and Profibus available as options
Specifications.
Figures are for the standard DPI620G. The IS series differs on loop power, ingress rating, weight and battery life.
Download the full datasheetCalibrator
- Display
- 4.3 in touch, 480 x 800
- Memory
- 4 GB plus 8 GB SD
- Operating temp
- −10 to 50 °C
- Ingress
- IP55, IP54 on IS
- Size
- 186 x 115.5 x 42.5 mm
- Weight
- 675 g, 1.1 kg IS
- Battery
- 12 h, 7 h dual function
Electrical
- DC voltage
- ±30 V measure
- DC source
- 0 to 20 V
- Current
- ±55 mA measure
- Current source
- 0.2 to 24 mA
- AC voltage
- 0 to 300 VAC probe
- Resistance
- 0 to 4,000 Ω
- Frequency
- 0 to 50 kHz
Pressure modules
- PM620
- 70 mbar to 1,000 bar
- PM620 uncertainty
- from 0.025% FS
- PM620LP
- 2.5 to 25 mbar diff
- PM620T
- 300 mbar to 100 bar
- PM620T uncertainty
- from 0.0125% FS
- Overpressure
- 110% FS working
- Sealing
- IP65
Compare the five models.
Electrical only, multifunction, or multifunction certified for Zone 1 and 2.
Safe areaStandard chassis
|
Hazardous areaIS chassis
|
||||
|---|---|---|---|---|---|
| Capability | 620G-B | 620G-H | 620G-L | 620G | 620G-IS |
| Measure mA, mV, V | |||||
| Source mA and loop power | 24 / 28 V | 24 / 28 V | 24 / 28 V | 24 / 28 V | 15 V |
| Pressure via PM620 modules | |||||
| Frequency, measure and source | – | – | |||
| RTD and thermocouple | – | – | |||
| HART communicator | – | – | |||
Profibus and Fieldbus variants  | – | – | – | PB / FF / FFPB | PB / FF / FFPB |
| 300 VAC probe | – | – | – | ||
| Bluetooth option | B1 | B1 | B1 | B1 | – |
| Hazardous area certification | – | – | – | – | ATEX / IECEx / ETL |
The complete system.
The DPI620G Genii works alone for electrical, temperature and frequency. Add a pressure module to measure pressure, a carrier to hold two of them, and a base if you need to generate it. Each part is ordered separately, and all four are stocked and supplied by Instrowest.
DPI620G
The handheld itself. On its own it already calibrates electrical, temperature and frequency loops, with HART communication built in.
View price
PM620 series
One module per range. It mounts on the carrier or straight onto a station, and swapping it re-ranges the whole system.
View price
MC620G
Clips onto the head of the calibrator and takes two modules, so you can read two pressure channels at once.
View price
Pressure bases
The calibrator reads pressure but does not create it. Add a station only if you need to generate it yourself, up to 1,000 bar.
View priceBefore you order: a DPI620G-IS needs IS modules, carrier and stations. Safe area and intrinsically safe parts do not mix, and we check the pairing before anything ships.
Not sure which model you need?
Instrumentation is all we do. Our technicians can tell you which build fits what you calibrate, whether you need the IS series, and which pressure modules to pair with it.
Ask our team
Enquiry sent
Thanks. We will get back to you shortly.